مقایسه محصولات
Oil Check Indicator
BERG
---
---
---
---
Air consumption
1.9SCIM/PSIG (0.07 mL/s/kPa)
---
---
---
---
Max. temperature rating [°C]
49
---
---
---
---
Pressure range
PSIG 10 - 125
---
---
---
---
Oil concentration Range [mg/m3]
0 - 30
---
---
---
---
Accessory
Oil indicator replacement cartridge
---
---
---
---
Mass [kg]
0.200
---
---
---
---
Medium
---
Compressed air free of aggressive, corrosive, caustic, toxic, flammable and combustion supporting materials or substances.
The use of a compressed air preparation adapted to the measurement task is necessary.
---
---
---
Measured value
---
Residual oil content in mg of oil/normal m³, relative to 1.0 bar, +20°C, 0% relative humidity, according to ISO 8573-1
---
---
---
Detectable substances
---
Polyalphaolefines, aromatics, hydrocarbons, aliphatic hydrocarbons and functional hydrocarbons
---
---
---
Applications
---
Downstream of activated carbon filter and activated-carbon adsorber,
downstream of BEKOKAT® (catalytic converter),
downstream of oil-free compressing compressor,
each with pre-switched filtration and drying
---
---
---
Ambient temperature, minimum/maximum
---
+5°C ... +45°C, rel. humidity ≤ 75%, non-condensing
---
---
---
Storage temperature
---
+5 °C ... +50 °C
---
---
---
Ambient pressure
---
800 ... 1200 mbar [a]
---
---
---
Climatic resistance
---
max. +10 °Ctd
---
---
---
Compressed air temperature, minimum/maximum
---
+5 °C ... +50 °C
---
---
---
Operating pressure
---
3 … 16 bar(g), optional pressure reducer which can be pre-switched for up to 300 bar(g)
---
---
---
Settings for operating pressure
---
By means of integrated pressure reducer with display
---
---
---
Measuring gas humidity
---
≤ 40 % relative humidity, max. pressure dew point +10 °C, non-condensing humidity
---
---
---
Compressed air connection
---
G 1/8” internal thread according to ISO 228-1
---
---
---
Measurement values
---
mg/standard m³, pressure and temperature compensated
---
---
---
Measuring range
---
≤ 0,01 … 2,50 mg/m³
---
---
---
Calibrated measuring range
---
≤ 0.01 … 1.25 mg/m³ residual oil content, according to ISO 8573-1
---
---
---
Detection limit (residual oil)
---
0,001 mg/m³
---
---
---
Measuring range and accuracy
---
≤ 0,01 … 0,5 mg/m³ ± 0,003
≥ 0,5 … 1,0 mg/m³ ± 0,10
≥ 1,0 … 2,5 mg/m³ ± 0,10
---
---
---
Measuring gas flow rate
---
approx. 1.20 standard litres / minute relative to 1.0 bar(a) and +20 °C, in depressurised state
---
---
---
Display for adhering to an ISO residual oil vapour class
---
As LED (red/green)
---
---
---
Reference gas generation
---
Integrated catalytic converter
---
---
---
Voltage supply
---
100 ... 240 VAC / 1 Ph. / PE / 50 ... 60 Hz / ± 10 %
---
---
---
Degree of protection
---
IP54 / DIN EN 60529
---
---
---
Interfaces
---
4 … 20 mA analogue output, 2-conductor system,
RS-485, MODBUS RTU for the transmission of measured values
1 alarm contact, normally open contact
---
---
---
Operating hours counter
---
Integrated
---
---
---
Measuring and display unit
---
A unit with a robust industrial design
---
---
---
Oil vapour detection
---
Compressed air free of aggressive, corrosive, caustic, toxic, flammable and oxidizing substances
---
---
---
Sensor element
---
PID (photo-ionisation detector)
---
---
---
Updating of the measured value display
---
Every 4 seconds
---
---
---
Display and operating concept
---
7-segment display with 5 buttons for setting configuration and alarm
---
---
---
Protection of the measuring cell against too high oil content
---
The measuring cell is protected against too high oil content by a valve switching process
---
---
---
Suppression of measured value outliers
---
Continuous floating mean value
---
---
---
Dimensions
---
410 x 440 x 163 mm (W x H x D)
---
---
---
Weight
---
approx. 16.3 kg
29.9Kg
---
1.7
CLEARPOINT M032GWT
---
---
(G) General Filter
---
---
CLEARPOINT M032 FWT
---
---
(Fine Filter (F
---
---
CLEARPOINT M032 SWT
---
---
Super Fine Filter (S)
---
---
CLEARPOINT M032 AWT
---
---
Activated Filter (A)
---
---
Flow rate @ 7 bar(g), 20°C
---
---
3120 Nm3/h
1830 scfm
---
195 Nm3/h
114 scfm
Flow rate @ 10 bar(g), 20°C
---
---
3713 Nm3/h
2178 scfm
---
232 Nm3/h
135 scfm
Connection Pipe size
---
---
"3
---
3/4
Max. Operation pressure
---
---
16bar
---
16bar
(Dimensions (mm
---
---
AxBxC1xC2xD: 260×77×1260×1045x200
---
AxBxC1xC2xD: 100×34×495x280x150
Pressure drop - new element
---
---
16(mbar)
---
---
change filter cartridge at P.d
---
---
mbar)350)
---
---
Quality Class - particle
---
---
G=3, F=2, S=1, A=1 <<<<<< According to ISO8573
G=3, F=2, S=1, A=1 <<<<<< According to ISO8573
---
Quality class - Oil
---
---
G=4, F=2, S=1, A=0 <<<<<< According to ISO8573
G=4, F=2, S=1, A=0 <<<<<< According to ISO8573
---
(Residual oil content(mg/m3
---
---
G=5, F=0.1, S=0.01, A=0.01 <<<<<< According to ISO8573
G=5, F=0.1, S=0.01, A=0.01 <<<<<< According to ISO8573
---
General Filter media
---
---
Acrylic fibers
Acrylic fibers
---
Fine Filter Media
---
---
Borosilicate
Borosilicate
---
Super Fine Filter Media
---
---
Borosilicate
Borosilicate
---
Activated Filter Media
---
---
Activate carbon
Activate carbon
---
PUREBERG-Element filter cartridge-06G
---
---
---
(G) General Filter
---
PUREBERG-Element filter cartridge-06F
---
---
---
(Fine Filter (F
---
PUREBERG-Element filter cartridge-06S
---
---
---
Super Fine Filter (S)
---
PUREBERG-Element filter cartridge-06A
---
---
---
Activated Filter (A)
---
کشور سازنده
---
---
---
آلمان
آلمان
CLEARPOINT S075WWB
---
---
---
---
Water Trap / Water Separator
Pressure drop
---
---
---
---
20(mbar)
Quality Class - Water
---
---
---
---
-.According to ISO8573 is Class-.5